Easy Glitch for Aesthetic Tractor Beam Corvette Layout

I don’t generally do glitch building because most of the time they’re quite complicated. But this one is easy, anyone can do it. You don’t need precise finger dexterity and you don’t have to memorize anything. The Cosmos update was phenomenal but catastrophic for everyone who has meticulously designed their corvettes. Here are 2 minimal corvettes built specifically for salvaging, they both have 3 walkways. They are practically identical except for 1 thing.

Here are the views from inside each corvette looking into the walkway that contains all the salvage cargo. For the first pic, you can see the area where the salvage cargo is stored. And you all know how messy it looks when you go salvaging, pathogen sacs and all sorts of biohazardous material all over the place. For the other one, you can’t even see the area, you just see a wall; out of sight, out of mind.

So here’s how you do the glitch. This is the front view. Lay down 2 mag-field landing thrusters right next to each other, one in front of the other.

Place 2 walkways on top of the mag-field thrusters.

Attach 3 tractor beams to the front walkway, 1 on the left, 1 on the right, 1 in front.

Now delete the front walkway BUT not the 3 tractor beams.

Orient your view so that you now see the corvette from the side, not from the front.

Now simply re-attach the walkway and it will be rotated by 90 degrees relative to the other walkway. Notice that the metal pattern on the top surfaces of the walkways are at 90 degrees to each other.

You will not get it on the first try. You have to move the walkway left and right, back and forth, up and down. It will take a few tries but the walkway will snap into place eventually. It shouldn’t take more than 30 seconds. That’s pretty much it, that’s the glitch. See how easy it is. The rest is standard stuff.

Now add the last walkway and the cockpit.

Place a reactor on top.

Add a thruster and a landing bay in the back. You only need 1 thruster but I’ve added 2.

Add 2 weapon systems on the sides for symmetry. I have added the photon cannon. Technically you only need 1 weapon system.

Add 2 ducting outlets on the sides also for aesthetics.

Lastly, be sure to add an internal walkway so you can access the cockpit. The fact that the walkways can rotate 90 degrees means the game already stores this state or value in memory. So most likely, this will be a feature for corvette building in the future. Putting a wall where ever you want will also likely be in a future update. But until then, you can do this.

10 Likes

I’ve been messing around with this glitch a bit more. Check out this configuration.

6 Likes

Ok, I’ve just built this ship. It’s all the same ship from different perspectives. I have not taken it out for a spin yet. I’m not sure what will happen. For the first pic, note where the space station core is relative to the corvette.

8 Likes

The game didn’t glitch or crash or anything. I successfully launched. This pic is third person view.

This pic is first person. When you thrust forward, you will see objects, such as the asteroids, move from left to right.

8 Likes

I have placed one walkway on top of another walkway that are oriented 90 degrees to each other. You cannot build an internal staircase to allow them access to each other from within the ship itself. You can access the altered walkways by building separate access from outside the ship.

4 Likes

Design it to look like a crab .. seeing as it fly’s sideways :smiley:

5 Likes

@Licoricemint I have included the ‘creative mode’ subcategory for your topic

1 Like